德国洗衣机脱水桶拆解方法

作者：功夫维修

回答：

如果你需要拆开德国洗衣机的脱水桶，那么需要注意其中需要修理或更换的部分。 在拆解德国洗衣机的脱水桶时，需要注意以下几点：

1. Safety first！ Always disconnect any electric or gas supply before attempting to do anything.

2. Open the access panel on the back of the washing machine.

3. Detach the drive belt from the motor and lift it off the transmission pulley.

4. Remove the water pump from the motor by depressing the locking tab and twisting the pump clockwise.

5. Remove the motor by first loosening the bolts that hold it to the chassis and then tilting it forward and out.

6. Unscrew the bolts that secure the transmission to the chassis.

7. The transmission will now be free to slide down and off the motor shaft. Be careful， as it is quite heavy.

8. The basket will be held in the outer tub by a large bolt or a retainer ring. Remove this and lift the basket out.

9. Now the inner tub will be exposed. It can be lifted out by pulling up on it as you rotate it.

10. Finally， the spider shaft that holds the inner tub in place will be visible. If this is damaged or corroded， it will need to be replaced.

By following these steps carefully， you should be able to disassemble your German washing machine’s spin drum and repair or replace any necessary parts. Remember to always exercise caution when working around electrical or gas connections， and if you are not comfortable undertaking this repair on your own， seek the help of a qualified professional.

免责声明：本网站转載内容均注明出处,转載是出于传递更多信息之目的,井不意味成其观点或证实其内容真实性。转载稿涉及版权等问题,请 立即联系网站编辑,我们会予以更改或删除相关文章,保证您的权利